For stadiums
Stadium LED perimeter software for UEFA and FIFA match days
A televised football match puts the pitchside LED boards in front of every camera for ninety minutes. LedPlayMeter is the LED perimeter software that runs those boards from one Windows PC: the whole band as one screen, a backup PC on standby, sponsor rotation with proof of play, and content that lands pixel for pixel on the cabinets. It runs today in 2022 FIFA World Cup stadiums in Qatar.
At a glance
What UEFA asks of the control software
UEFA publishes the LED technical specifications for club competitions (the edition valid as of July 2021 covers the 2021–2024/25 cycle). Most of the document is about the boards themselves — pixel pitch, refresh rate, height, weather and impact protection, power. Two items in the content control table are about the playout system, and they are required in every UEFA club competition:
- “System viewed and operated as one single screen by control software.” LedPlayMeter draws the touchlines, goal lines and corners as one continuous band from the field template — the operator never steers sides or sender cards one by one.
- “Dual signal servers, each on UPS.” A second PC runs as a hot backup: it mirrors every player command from the primary, so if the primary fails you switch the LED processor’s input to the backup and the match carries on.
Logos that are not squashed or stretched
Distorted sponsor logos are the most visible mistake on a perimeter: a band that is 40,000 pixels wide and 144 pixels high leaves no room for guesswork. LedPlayMeter is built around the cabinet grid of your band. Artwork made at the cabinet size — for example 768 × 144 px for three 256 × 144 px cabinets — plays 1:1: every image pixel lands on exactly one LED pixel, with no resampling, so logos keep their proportions.
The band preview shows every file across the whole perimeter before it goes on air, so the operator sees exactly what the cameras will see.
Built for broadcast match days
- Synchronised band — every cabinet slice is taken from the same video frame, so there are no seams or offsets between cabinets, sides or corners.
- Seamless transitions — the next scene is prepared in the background and swaps without black frames.
- Sponsor rotation with proof of play — campaigns with airtime quotas and pacing build the match rotation, and the sponsor report lists every airing for export to PDF or Excel.
- Quick actions — goal, card, substitution or a partner message cut in with one click and return to the rotation where it left off.
- Match information — fixed panels for score, clock and match timer above the rotation.
- Live brightness — dim the output per zone during the match from the control panel or a tablet at pitchside.
- Uneven processor rows — blind cabinets map gaps in the sender layout so the band stays continuous on the pitch.
UEFA requirements for the LED boards
UEFA reviews the complete LED system on site, and a colour test with the host broadcaster’s main camera is run the evening before the match. The board requirements are below; LedPlayMeter works with any processor and boards that meet them.
| UEFA item (July 2021 edition) | UEFA Champions League & finals | Europa League / Conference League / Women’s Champions League |
|---|---|---|
| Pixel pitch | 12.5 mm or less, 3-in-1 SMD | 16 mm or less, 3-in-1 SMD |
| Refresh rate | Min. 2,800 Hz | Min. 1,800 Hz |
| Display height | Min. 90 cm | Min. 80 cm |
| Length | Min. 246 m, closed corners | Touchline and goal line; open corners allowed |
| Luminance | Min. 5,500 nit, ideal 6,000 nit | Optional |
FIFA stadiums
FIFA’s Football Stadiums Guidelines deal with where perimeter boards stand — clear space behind the goal lines and beyond the touchlines, unobstructed emergency routes to the pitch and clear sightlines for spectators — rather than with playout software. LedPlayMeter runs the perimeter boards at Al Bayt, Khalifa International, Al Thumama and Ahmad Bin Ali, four stadiums that hosted the 2022 FIFA World Cup, together with Al Gharafa Stadium, where they carry Qatar Stars League football today. Read the Techno Q case study.
Frequently asked questions
Is LedPlayMeter UEFA compliant?
Yes, on the software side: LedPlayMeter meets the two control-software items in UEFA’s LED technical specifications — the whole system operated as one single screen, and dual signal servers through a hot-standby backup PC. UEFA surveys and approves the complete LED system at each stadium.
Will sponsor logos look stretched on the boards?
Not with artwork made at the cabinet size: it plays 1:1, one image pixel per LED pixel, with no resampling, so logos keep their proportions. The band preview shows every file before it goes on air.
What happens if the playout PC fails during a match?
A paired backup PC mirrors every player command from the primary. On a failure, the LED processor’s input is switched to the backup and the backup carries on with the same playlist.
Which stadiums use LedPlayMeter?
Al Bayt, Khalifa International, Al Thumama and Ahmad Bin Ali — four 2022 FIFA World Cup stadiums — and Al Gharafa Stadium in Qatar, with integrator Techno Q on AOTO boards, plus Al-Shatra Stadium in Iraq with Videomobile on NovaStar.
UEFA, UEFA Champions League, UEFA Europa League, UEFA Conference League, FIFA and FIFA World Cup are trademarks of their owners and are named only to describe requirements and venues. LedPlayMeter is not affiliated with or endorsed by UEFA or FIFA. Requirements are quoted from UEFA’s “LED technical specifications for club competitions” (valid as of July 2021). Questions about a specific stadium? Contact us.